# MAVLink通讯

MAVLink (opens new window) 是一个针对无人机生态系统设计的非常轻量化的消息传递协议。

PX4 使用 MAVLink 实现与 QGroundControl (或者其它地面站软件)的通讯交流,同时也将其用于整合飞控板与飞控板之外的无人机部件:伴随计算机、支持 MAVLink 的摄像头等。

该协议定义了许多用于交换数据的标准 消息 (opens new window)微型服务(microservices) (opens new window)(PX4 中用到了许多消息/服务,但不是全部)。

本教程介绍了如何为你自己新 "自定义" 的报文添加 PX4 支持。


The tutorial assumes you have a custom uORB ca_trajectory message in msg/ca_trajectory.msg and a custom MAVLink ca_trajectory message in mavlink/include/mavlink/v2.0/custom_messages/mavlink_msg_ca_trajectory.h.

PX4 includes the mavlink/mavlink (opens new window) repo as a submodule under /src/modules/mavlink (opens new window), and generates the MAVLink 2 C header files at build time.

There are are number of XML dialect files in /mavlink/messages/1.0/ (opens new window). The dialect that is built is specified using the variable MAVLINK_DIALECT in /src/modules/mavlink/CMakeLists.txt (opens new window); by default this is development.xml (opens new window). The files are generated into the build directory: /build/<build target>/mavlink/.

In order to add your message we recommend that you create your messages in a new dialect file in the same directory, for example PX4-Autopilot/src/modules/mavlink/mavlink/message_definitions/v1.0/custom_messages.xml, and set MAVLINK_DIALECT to build the new file. This dialect file should include development.xml.

You can alternatively add your messages to common.xml or development.xml. Whatever dialect file you use must eventually be built in QGroundControl (or whatever software you use to communicate with PX4).

The MAVLink developer guide explains how to define new messages in How to Define MAVLink Messages & Enums (opens new window).

You can check that your new messages are built by inspecting the headers generated in the build directory. If your messages are not built they may be incorrectly formatted, or use clashing ids. Inspect the build log for information.


The MAVLink Developer guide (opens new window) has more information about using the MAVLink toolchain.

# 发送自定义MAVLink消息

This section explains how to use a custom uORB message and send it as a MAVLink message.

Add the headers of the MAVLink and uORB messages to mavlink_messages.cpp (opens new window)

#include <uORB/topics/ca_trajectory.h>
#include <v2.0/custom_messages/mavlink.h>

Create a new class in mavlink_messages.cpp (opens new window)

class MavlinkStreamCaTrajectory : public MavlinkStream
    const char *get_name() const
        return MavlinkStreamCaTrajectory::get_name_static();
    static const char *get_name_static()
        return "CA_TRAJECTORY";
    static uint16_t get_id_static()
    uint16_t get_id()
        return get_id_static();
    static MavlinkStream *new_instance(Mavlink *mavlink)
        return new MavlinkStreamCaTrajectory(mavlink);
    unsigned get_size()

    uORB::Subscription _sub{ORB_ID(ca_trajectory)};

    /* do not allow top copying this class */
    MavlinkStreamCaTrajectory(MavlinkStreamCaTrajectory &);
    MavlinkStreamCaTrajectory& operator = (const MavlinkStreamCaTrajectory &);

    explicit MavlinkStreamCaTrajectory(Mavlink *mavlink) : MavlinkStream(mavlink)

    bool send() override
        struct ca_traj_struct_s _ca_trajectory;    //make sure ca_traj_struct_s is the definition of your uORB topic

        if (_sub.update(&_ca_trajectory)) {
            mavlink_ca_trajectory_t _msg_ca_trajectory;  //make sure mavlink_ca_trajectory_t is the definition of your custom MAVLink message

            _msg_ca_trajectory.timestamp = _ca_trajectory.timestamp;
            _msg_ca_trajectory.time_start_usec = _ca_trajectory.time_start_usec;
            _msg_ca_trajectory.time_stop_usec  = _ca_trajectory.time_stop_usec;
            _msg_ca_trajectory.coefficients =_ca_trajectory.coefficients;
            _msg_ca_trajectory.seq_id = _ca_trajectory.seq_id;

            mavlink_msg_ca_trajectory_send_struct(_mavlink->get_channel(), &_msg_ca_trajectory);

            return true;

        return false;

Finally append the stream class to the streams_list at the bottom of mavlink_messages.cpp (opens new window)

StreamListItem *streams_list[] = {

Then make sure to enable the stream, for example by adding the following line to the startup script (e.g. /ROMFS/px4fmu_common/init.d-posix/rcS (opens new window) on NuttX or ROMFS/px4fmu_common/init.d-posix/rcS (opens new window)) on SITL. Note that -r configures the streaming rate and -u identifies the MAVLink channel on UDP port 14556).

mavlink stream -r 50 -s CA_TRAJECTORY -u 14556


You can use the uorb top [<message_name>] command to verify in real-time that your message is published and the rate (see uORB Messaging). This approach can also be used to test incoming messages that publish a uORB topic (for other messages you might use printf in your code and test in SITL).

To see the message on QGroundControl you will need to build it with your MAVLink library (opens new window), and then verify that the message is received using MAVLink Inspector Widget (opens new window) (or some other MAVLink tool).

# 接收自定义MAVLink消息

This section explains how to receive a message over MAVLink and publish it to uORB.

Add a function that handles the incoming MAVLink message in mavlink_receiver.h (opens new window)

#include <uORB/topics/ca_trajectory.h>
#include <v2.0/custom_messages/mavlink_msg_ca_trajectory.h>

Add a function that handles the incoming MAVLink message in the MavlinkReceiver class in mavlink_receiver.h (opens new window)

void handle_message_ca_trajectory_msg(mavlink_message_t *msg);

Add an uORB publisher in the MavlinkReceiver class in mavlink_receiver.h (opens new window)

uORB::Publication<ca_trajectory_s>          _ca_traj_msg_pub{ORB_ID(ca_trajectory)};

Implement the handle_message_ca_trajectory_msg function in mavlink_receiver.cpp (opens new window)

void MavlinkReceiver::handle_message_ca_trajectory_msg(mavlink_message_t *msg)
    mavlink_ca_trajectory_t traj;
    mavlink_msg_ca_trajectory_decode(msg, &traj);

    struct ca_traj_struct_s f;
    memset(&f, 0, sizeof(f));

    f.timestamp = hrt_absolute_time();
    f.seq_id = traj.seq_id;
    f.time_start_usec = traj.time_start_usec;
    f.time_stop_usec = traj.time_stop_usec;
    for(int i=0;i<28;i++)
        f.coefficients[i] = traj.coefficients[i];


and finally make sure it is called in MavlinkReceiver::handle_message() (opens new window)

MavlinkReceiver::handle_message(mavlink_message_t *msg)
    switch (msg->msgid) {

# 另一种自定义MAVlink消息的办法

Sometimes there is the need for a custom MAVLink message with content that is not fully defined.

For example when using MAVLink to interface PX4 with an embedded device, the messages that are exchanged between the autopilot and the device may go through several iterations before they are stabilized. In this case, it can be time-consuming and error-prone to regenerate the MAVLink headers, and make sure both devices use the same version of the protocol.

An alternative - and temporary - solution is to re-purpose debug messages. Instead of creating a custom MAVLink message CA_TRAJECTORY, you can send a message DEBUG_VECT with the string key CA_TRAJ and data in the x, y and z fields. See this tutorial. for an example usage of debug messages.


This solution is not efficient as it sends character string over the network and involves comparison of strings. It should be used for development only!

# Testing

Ultimately you'll want to test your new MAVLink interface is working by providing the corresponding ground station or MAVSDK implementation. As a first step, and while debugging, commonly you'll just want to confirm that any messages you've created are being sent/received as you expect.

There are several approaches you can use to view traffic:

# General

# 设置流速率(streaming rate)

Sometimes it is useful to increase the streaming rate of individual topics (e.g. for inspection in QGC). This can be achieved by typing the following line in the shell:

mavlink stream -u <port number> -s <mavlink topic name> -r <rate>

You can get the port number with mavlink status which will output (amongst others) transport protocol: UDP (<port number>). An example would be:

mavlink stream -u 14556 -s OPTICAL_FLOW_RAD -r 300