Посібник користувача автопілота PX4
PX4 is an open-source autopilot for drones and autonomous vehicles. It runs on multirotors, fixed-wing, VTOL, helicopters, rovers, and more. This guide covers everything from assembly and configuration to flight operations and development.
Try PX4
No hardware needed. Run PX4 in simulation with a single command using Docker or a .deb package. Connect QGroundControl, MAVSDK, or ROS 2 and start flying immediately.
For Developers
Want to modify PX4 or build from source? Start with the Development Guide: set up your dev environment, build the code, and run SITL simulation.
Початок роботи
Start with Basic Concepts for an overview of the flight stack, flight modes, safety features, and supported hardware.
Build a Vehicle
Pick your frame type: Multicopter, Fixed-Wing, VTOL, Helicopter, or Rover. Each section covers complete vehicles, kits, and DIY builds. For assembly instructions see Assembling a Multicopter or the equivalent for your frame.
Configure and Tune
Once assembled, follow the configuration guide for your vehicle type (e.g. Multicopter Configuration). This covers sensor calibration, flight mode setup, and tuning.
Апаратне забезпечення(Hardware)
The Hardware Selection & Setup section covers flight controllers, sensors, telemetry, RC systems, and payloads. See Payloads for camera and delivery integrations.
Fly
Read Operations to understand safety features and failsafe behavior before your first flight. Then see Basic Flying (Multicopter) or the equivalent for your frame type.
Підтримка
Get help on the discussion forums or Discord. See the Support page for diagnosing problems, reporting bugs, and joining the weekly dev call.
Долучитись до проєкту
See the Contributing section for code, documentation, and translation guidelines.
Переклади
There are several translations of this guide. Use the language selector in the top navigation.
🇺🇦Особлива подяча всім контрибюторам цього перекладу🇺🇦
Подяка цим неймовірним людям які допомогли перекласти цей посібник (на українську мову) і зробили основну частину перекладу:
 Tamara Koliada - Project Lead (56%) 💻 📖 |  Serhii Syrotskyi(6%) 💻 |  Viktoriia Kachanovska (8%) 💻 |  Oleksandr Yalynskyi (10%) 💻 |  Sika Khrystyna (7%) 💻 |  Eduard Pavlenko(7%) 💻 |
|---|
Також подяка що долучились ⭐ Gazzaladra, ⭐ Aleksi (ukrcherry), ⭐ dimapuntus, ⭐ Andrii Shelestov (streamx3), ⭐ AnastasiiaVS, ⭐ Borys Biletskyy, ⭐ Андрей Свереденко, ⭐ Janna (JannaBi) ⭐ Orm та ⭐ Radiocab.
Дякуємо за ваш внесок у нашу спільну перемогу! І популяризацію розробки дронів серед українців Слава Україні!🇺🇦
Ліцензія
PX4 code is free to use and modify under the terms of the permissive BSD 3-clause license. This documentation is licensed under CC BY 4.0. For more information see: Licences.
Calendar & Events
The Dronecode Calendar shows important community events for platform users and developers. Виберіть посилання нижче, щоб відобразити календар у вашому часовому поясі (а також додати його до вашого власного календаря):
TIP
The calendar default timezone is Central European Time (CET).
Іконки
Наступні значки, що використовуються в цій бібліотеці, мають ліцензію окремо (як показано нижче):
placeholder icon made by Smashicons from www.flaticon.com is licensed by CC 3.0 BY.
camera-automatic-mode icon made by Freepik from www.flaticon.com is licensed by CC 3.0 BY.
Управління
The PX4 Autopilot project is hosted by the Dronecode Foundation, a Linux Foundation Collaborative Project. Dronecode holds all PX4 trademarks and serves as the project's legal guardian, ensuring vendor-neutral stewardship. No single company owns the name or controls the roadmap. The source code is licensed under the BSD 3-Clause license, so you are free to use, modify, and distribute it in your own projects.
Doc build time: "2026-10-12T21:55:28.690Z"