# 모듈 참조: 관성 센서(드라이버)
# adis16448
소스: drivers/imu/analog_devices/adis16448 (opens new window)
# 사용법
adis16448 <command> [arguments...]
Commands:
start
[-s] Internal SPI bus(es)
[-S] External SPI bus(es)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-c <val>] chip-select index (for external SPI)
default: 1
[-m <val>] SPI mode
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-R <val>] Rotation
default: 0
stop
status print status info
# adis16470
소스: drivers/imu/analog_devices/adis16470 (opens new window)
# 사용법
adis16470 <command> [arguments...]
Commands:
start
[-s] Internal SPI bus(es)
[-S] External SPI bus(es)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-c <val>] chip-select index (for external SPI)
default: 1
[-m <val>] SPI mode
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-R <val>] Rotation
default: 0
stop
status print status info
# adis16477
소스: drivers/imu/adis16477 (opens new window)
# 사용법
adis16477 <command> [arguments...]
Commands:
start
[-s] Internal SPI bus(es)
[-S] External SPI bus(es)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-c <val>] chip-select index (for external SPI)
default: 1
[-m <val>] SPI mode
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-R <val>] Rotation
default: 0
stop
status print status info
# adis16497
소스: drivers/imu/adis16497 (opens new window)
# 사용법
adis16497 <command> [arguments...]
Commands:
start
[-s] Internal SPI bus(es)
[-S] External SPI bus(es)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-c <val>] chip-select index (for external SPI)
default: 1
[-m <val>] SPI mode
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-R <val>] Rotation
default: 0
stop
status print status info
# bmi055
소스: drivers/imu/bosch/bmi055 (opens new window)
# 사용법
bmi055 <command> [arguments...]
Commands:
start
[-A] Accel
[-G] Gyro
[-s] Internal SPI bus(es)
[-S] External SPI bus(es)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-c <val>] chip-select index (for external SPI)
default: 1
[-m <val>] SPI mode
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-R <val>] Rotation
default: 0
stop
status print status info
# bmi088
소스: drivers/imu/bosch/bmi088 (opens new window)
# 사용법
bmi088 <command> [arguments...]
Commands:
start
[-A] Accel
[-G] Gyro
[-s] Internal SPI bus(es)
[-S] External SPI bus(es)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-c <val>] chip-select index (for external SPI)
default: 1
[-m <val>] SPI mode
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-R <val>] Rotation
default: 0
stop
status print status info
# bmi088_i2c
소스: drivers/imu/bosch/bmi088/bmi088_i2c (opens new window)
# 사용법
bmi088_i2c <command> [arguments...]
Commands:
start
[-A] Accel
[-G] Gyro
[-I] Internal I2C bus(es)
[-X] External I2C bus(es)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-a <val>] I2C address
default: 24
[-R <val>] Rotation
default: 0
stop
status print status info
# fxas21002c
소스: drivers/imu/fxas21002c (opens new window)
# 사용법
fxas21002c <command> [arguments...]
Commands:
start
[-I] Internal I2C bus(es)
[-X] External I2C bus(es)
[-s] Internal SPI bus(es)
[-S] External SPI bus(es)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-c <val>] chip-select index (for external SPI)
default: 1
[-m <val>] SPI mode
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-a <val>] I2C address
default: 32
[-R <val>] Rotation
default: 0
regdump
testerror
stop
status print status info
# fxos8701cq
소스: drivers/imu/fxos8701cq (opens new window)
# 사용법
fxos8701cq <command> [arguments...]
Commands:
start
[-I] Internal I2C bus(es)
[-X] External I2C bus(es)
[-s] Internal SPI bus(es)
[-S] External SPI bus(es)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-c <val>] chip-select index (for external SPI)
default: 1
[-m <val>] SPI mode
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-a <val>] I2C address
default: 30
[-R <val>] Rotation
default: 0
regdump
testerror
stop
status print status info
# icm20602
소스: drivers/imu/invensense/icm20602 (opens new window)
# 사용법
icm20602 <command> [arguments...]
Commands:
start
[-s] Internal SPI bus(es)
[-S] External SPI bus(es)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-c <val>] chip-select index (for external SPI)
default: 1
[-m <val>] SPI mode
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-R <val>] Rotation
default: 0
stop
status print status info
# icm20608g
소스: drivers/imu/invensense/icm20608g (opens new window)
# 사용법
icm20608g <command> [arguments...]
Commands:
start
[-s] Internal SPI bus(es)
[-S] External SPI bus(es)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-c <val>] chip-select index (for external SPI)
default: 1
[-m <val>] SPI mode
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-R <val>] Rotation
default: 0
stop
status print status info
# icm20649
소스: drivers/imu/invensense/icm20649 (opens new window)
# 사용법
icm20649 <command> [arguments...]
Commands:
start
[-s] Internal SPI bus(es)
[-S] External SPI bus(es)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-c <val>] chip-select index (for external SPI)
default: 1
[-m <val>] SPI mode
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-R <val>] Rotation
default: 0
stop
status print status info
# icm20689
소스: drivers/imu/invensense/icm20689 (opens new window)
# 사용법
icm20689 <command> [arguments...]
Commands:
start
[-s] Internal SPI bus(es)
[-S] External SPI bus(es)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-c <val>] chip-select index (for external SPI)
default: 1
[-m <val>] SPI mode
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-R <val>] Rotation
default: 0
stop
status print status info
# icm20948
소스: drivers/imu/invensense/icm20948 (opens new window)
# 사용법
icm20948 <command> [arguments...]
Commands:
start
[-s] Internal SPI bus(es)
[-S] External SPI bus(es)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-c <val>] chip-select index (for external SPI)
default: 1
[-m <val>] SPI mode
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-M] Enable Magnetometer (AK8963)
[-R <val>] Rotation
default: 0
stop
status print status info
# icm20948_i2c_passthrough
소스: drivers/imu/invensense/icm20948 (opens new window)
# 사용법
icm20948_i2c_passthrough <command> [arguments...]
Commands:
start
[-I] Internal I2C bus(es)
[-X] External I2C bus(es)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-a <val>] I2C address
default: 105
stop
status print status info
# icm40609d
소스: drivers/imu/invensense/icm40609d (opens new window)
# 사용법
icm40609d <command> [arguments...]
Commands:
start
[-s] Internal SPI bus(es)
[-S] External SPI bus(es)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-c <val>] chip-select index (for external SPI)
default: 1
[-m <val>] SPI mode
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-R <val>] Rotation
default: 0
stop
status print status info
# icm42605
소스: drivers/imu/invensense/icm42605 (opens new window)
# 사용법
icm42605 <command> [arguments...]
Commands:
start
[-s] Internal SPI bus(es)
[-S] External SPI bus(es)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-c <val>] chip-select index (for external SPI)
default: 1
[-m <val>] SPI mode
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-R <val>] Rotation
default: 0
stop
status print status info
# icm42688p
소스: drivers/imu/invensense/icm42688p (opens new window)
# 사용법
icm42688p <command> [arguments...]
Commands:
start
[-s] Internal SPI bus(es)
[-S] External SPI bus(es)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-c <val>] chip-select index (for external SPI)
default: 1
[-m <val>] SPI mode
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-R <val>] Rotation
default: 0
stop
status print status info
# l3gd20
소스: drivers/imu/l3gd20 (opens new window)
# 사용법
l3gd20 <command> [arguments...]
Commands:
start
[-s] Internal SPI bus(es)
[-S] External SPI bus(es)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-c <val>] chip-select index (for external SPI)
default: 1
[-m <val>] SPI mode
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-R <val>] Rotation
default: 0
regdump
testerror
stop
status print status info
# lsm303d
소스: drivers/imu/lsm303d (opens new window)
# 사용법
lsm303d <command> [arguments...]
Commands:
start
[-s] Internal SPI bus(es)
[-S] External SPI bus(es)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-c <val>] chip-select index (for external SPI)
default: 1
[-m <val>] SPI mode
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-R <val>] Rotation
default: 0
stop
status print status info
# lsm9ds1
소스: drivers/imu/st/lsm9ds1 (opens new window)
# 사용법
lsm9ds1 <command> [arguments...]
Commands:
start
[-s] Internal SPI bus(es)
[-S] External SPI bus(es)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-c <val>] chip-select index (for external SPI)
default: 1
[-m <val>] SPI mode
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-R <val>] Rotation
default: 0
stop
status print status info
# mpu6000
소스: drivers/imu/invensense/mpu6000 (opens new window)
# 사용법
mpu6000 <command> [arguments...]
Commands:
start
[-s] Internal SPI bus(es)
[-S] External SPI bus(es)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-c <val>] chip-select index (for external SPI)
default: 1
[-m <val>] SPI mode
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-R <val>] Rotation
default: 0
stop
status print status info
# mpu9520
소스: drivers/imu/invensense/mpu6500 (opens new window)
# 사용법
mpu9520 <command> [arguments...]
Commands:
start
[-s] Internal SPI bus(es)
[-S] External SPI bus(es)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-c <val>] chip-select index (for external SPI)
default: 1
[-m <val>] SPI mode
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-R <val>] Rotation
default: 0
stop
status print status info
# mpu9520_i2c
소스: drivers/imu/invensense/mpu9250 (opens new window)
# 사용법
mpu9520_i2c <command> [arguments...]
Commands:
start
[-I] Internal I2C bus(es)
[-X] External I2C bus(es)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-a <val>] I2C address
default: 57
[-R <val>] Rotation
default: 0
stop
status print status info
# mpu9520_i2c
Source: drivers/imu/invensense/mpu9250 (opens new window)
# Usage
mpu9520_i2c <command> [arguments...]
Commands:
start
[-I] Internal I2C bus(es)
[-X] External I2C bus(es)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-a <val>] I2C address
default: 57
[-R <val>] Rotation
default: 0
stop
status print status info