# PX4 SD Card Layout

The PX4 SD Card is used for storing configuration files, flight logs, mission information etc.


The SD card should be FAT32 formatted for use with PX4 (this is the default for SD cards). We recommend that you reformat cards that are using a different file system.

The directory structure/layout is shown below.

Directory/File(s) 描述
/etc/ Extra config (+ mixers). See System Startup > Replacing the System Startup.
/etc/mixers/ Mixers
/log/ Full flight logs
/mission_log/ Reduced flight logs
/fw/ UAVCAN firmware
/uavcan.db/ UAVCAN DB + logs
/params Parameters (if not in FRAM/FLASH)
/dataman Mission storage file
/fault_<datetime>.txt Hardfault files
/bootlog.txt Boot log file