# Modules Reference: Estimator

# AttitudeEstimatorQ

Source: modules/attitude_estimator_q (opens new window)

# Description

Attitude estimator q.

# Usage

wind_estimator <command> [arguments...]
 Commands:
   start
   stop
   status        print status info

# wind_estimator

The documentation can be found on the tuning_the_ecl_ekf (opens new window) page.

# Description

This module provides a single airspeed_validated topic, containing indicated (IAS), calibrated (CAS), true airspeed (TAS) and the information if the estimation currently is invalid and if based sensor readings or on groundspeed minus windspeed. Supporting the input of multiple "raw" airspeed inputs, this module automatically switches to a valid sensor in case of failure detection. For failure detection as well as for the estimation of a scale factor from IAS to CAS, it runs several wind estimators and also publishes those.

# Usage

local_position_estimator <command> [arguments...]
 Commands:
   start
   stop
   status        print status info

# ekf2

Source: modules/ekf2 (opens new window)

# Description

Attitude and position estimator using an Extended Kalman Filter. It is used for Multirotors and Fixed-Wing.

Source: modules/wind_estimator (opens new window)

ekf2 can be started in replay mode (-r): in this mode it does not access the system time, but only uses the timestamps from the sensor topics.

# Usage

ekf2 <command> [arguments...]
 Commands:
   start
     [-r]        Enable replay mode
   stop
   status        print status info
   select_instance Request switch to new estimator instance
     <instance>  Specify desired estimator instance

# local_position_estimator

Source: modules/local_position_estimator (opens new window)

# Description

Attitude and position estimator using an Extended Kalman Filter.

# Usage

local_position_estimator <command> [arguments...]
 Commands:
   start
   stop
   status        print status info

# mc_hover_thrust_estimator

Source: modules/mc_hover_thrust_estimator (opens new window)

# Description

# Usage

mc_hover_thrust_estimator <command> [arguments...]
 Commands:
   start
   stop
   status        print status info

← 자기 센서 모의시험 →