# SiK Radio Integration
SiK radio (opens new window) is a collection of firmware and tools for telemetry radios.
Information about using SiK Radio can be found in Peripheral Hardware > Telemetry > SiK Radio
The ("developer") information below explains how to build SiK firmware from source and configure it using AT commands.
# Supported Radio Hardware
The SiK repository includes bootloaders and firmware for the following telemetry radios (2020-02-25):
- HopeRF HM-TRP
- HopeRF RF50-DEMO
The SiK repository does not currently firmware for RFD900x or RFD900ux telemetry radios. In order to update firmware on these radios (for instance, in order to support MAVLink v2.0), the following process is suggested:
# Build Instructions
You will need to install the required 8051 compiler, as this is not included in the default PX4 Build toolchain.
# Mac OS
Install the toolchain:
brew install sdcc
Build the image for the standard SiK Radio / 3DR Radio:
git clone https://github.com/LorenzMeier/SiK.git
Upload it to the radio (change the serial port name):
tools/uploader.py --port /dev/tty.usbserial-CHANGETHIS dst/radio~hm_trp.ihx
# Configuration Instructions
The radio supports AT commands for configuration.
screen /dev/tty.usbserial-CHANGETHIS 57600 8N1
Then start command mode:
DO NOT TYPE ANYTHING ONE SECOND BEFORE AND AFTER
List the current settings:
Then set the net ID, write settings and reboot radio:
You might have to power-cycle the radio to connect it to the 2nd radio.