Test MC_06 - Optical Flow

Objective

To test that optical flow / external vision work as expected

Preflight

Disconnect all GPS / compasses and ensure vehicle is using optical flow for navigation

Ensure that the drone can go into Altitude / Position flight mode while still on the ground

Flight Tests

❏ Altitude flight mode

    ❏ Vertical position should hold current value with stick centered

    ❏ Pitch/Roll/Yaw response 1:1

    ❏ Throttle response set to climb/descent rate

❏ Position flight mode

    ❏ Horizontal position should hold current value with stick centered

    ❏ Vertical position should hold current value with stick centered

    ❏ Throttle response set to climb/descent rate

    ❏ Pitch/Roll/Yaw response set to pitch/roll/yaw rates

Landing

❏ Land in either Position or Altitude mode with the throttle below 40%

❏ Upon touching ground, copter should disarm automatically within 2 seconds (default: see COM_DISARM_LAND)

Expected Results

• Take-off should be smooth as throttle is raised
• No oscillations should present in any of the above flight modes
• Upon landing, copter should not bounce on the ground