MacOS 개발 환경

아래에서 macOS용 PX4 개발 환경 설정 방법을 설명합니다. PX4 빌드에 사용되어 집니다.

• Pixhawk와 기타 NuttX 기반 하드웨어
• Gazebo Classic Simulation

TIP

이 설정은 PX4 개발 팀에서 지원합니다. To build other targets you will need to use a different OS (or an unsupported development environment).

영상 가이드

@유투브

Base Setup

The "base" macOS setup installs the tools needed for building firmware, and includes the common tools that will be needed for installing/using the simulators.

Environment Setup

Details

애플 M1 맥북 사용자 Apple M1 Macbook이 있는 경우 x86 터미널을 설정하여 터미널을 x86으로 실행해야 합니다.

1. 유틸리티 폴더(Finder > 이동 메뉴 > 유틸리티)에서 터미널 애플리케이션을 찾습니다.
2. Select Terminal.app and right-click on it, then choose Duplicate.
3. Rename the duplicated Terminal app, e.g. to x86 Terminal
4. Now select the renamed x86 Terminal app and right-click and choose *Get Info
5. Rosetta를 사용하여 열기 확인란을 선택하고, 창을 닫습니다.
6. Run the x86 Terminal as usual, which will fully support the current PX4 toolchain

First set up the environment

1. Enable more open files by appending the following line to the ~/.zshenv file (creating it if necessary):

   echo ulimit -S -n 2048 >> ~/.zshenv

   If you don't do this, the build toolchain may report the error: "LD: too many open files"

:::

1. Enforce Python 3 by appending the following lines to ~/.zshenv

   # Point pip3 to MacOS system python 3 pip
   alias pip3=/usr/bin/pip3

공통 도구

To setup the environment to be able to build for Pixhawk/NuttX hardware (and install the common tools for using simulators):

1. Install Homebrew by following these installation instructions.

2. Run these commands in your shell to install the common tools:

   brew tap PX4/px4
   brew install px4-dev

3. Install the required Python packages:

   # install required packages using pip3
   python3 -m pip install --user pyserial empty toml numpy pandas jinja2 pyyaml pyros-genmsg packaging kconfiglib future jsonschema
   # if this fails with a permissions error, your Python install is in a system path - use this command instead:
   sudo -H python3 -m pip install --user pyserial empty toml numpy pandas jinja2 pyyaml pyros-genmsg packaging kconfiglib future jsonschema

Gazebo Classic Simulation

To setup the environment for Gazebo Classic simulation:

1. Run the following commands in your shell:

   brew unlink tbb
   sed -i.bak '/disable! date:/s/^/  /; /disable! date:/s/./#/3' $(brew --prefix)/Library/Taps/homebrew/homebrew-core/Formula/tbb@2020.rb
   brew install tbb@2020
   brew link tbb@2020

   jMAVSim과 함께 SITL 시뮬레이션을 사용하려면, 최신 버전의 Java(예: Java 15)를 설치합니다. They can be removed once it is fixed (along with this note). :::

2. To install SITL simulation with Gazebo Classic:

   brew install --cask temurin
   brew install --cask xquartz
   brew install px4-sim-gazebo

3. Run the macOS setup script: PX4-Autopilot/Tools/setup/macos.sh The easiest way to do this is to clone the PX4 source, and then run the script from the directory, as shown:

   git clone https://github.com/PX4/PX4-Autopilot.git --recursive
   cd PX4-Autopilot/Tools/setup
   sh macos.sh

다음 단계

Once you have finished setting up the command-line toolchain:

• VSCode를 설치합니다(명령줄에 IDE 사용을 선호하는 경우).
• Install the QGroundControl Daily Build

TIP

The daily build includes development tools that are hidden in release builds. 또한, 릴리스 빌드에서 아직 지원되지 않는 새로운 PX4 기능에 대한 액세스를 제공할 수도 있습니다.

• 빌드 지침을 계속 진행합니다.