Test MC_02 - Full Autonomous

Objective

To test the auto modes such as Mission, Return, etc...

Preflight

Plan a mission on the ground. Ensure the mission has

• Takeoff as first waypoint
• Changes in Altitude throughout the mission
• Last waypoint is a Return item
• Duration of 5 to 6 minutes

Flight Tests

❏ Mission

    ❏ Auto take-off

    ❏ Changes in Altitude throughout the mission

    ❏ First waypoint set to Takeoff

    ❏ Enable Mission End Return

    ❏ Duration of 5 to 6 minutes

    ❏ Auto Disarm on land

❏ Mission + Manual arm

    ❏ Arm in any manual mode

    ❏ Engage Auto (Mission Mode) to trigger take-off

    ❏ Observe tracking, cornering and proper Return performance

    ❏ Upon touching ground, copter should disarm automatically within 2 seconds (disarm time set by parameter: COM_DISARM_LAND)

❏ Return

    ❏ Arm and takeoff in position mode

    ❏ Fly out ~10m from start point

    ❏ Engage Return mode

    ❏ Observe tracking, cornering and proper Return performance

Expected Results

• Take-off should be smooth as throttle is raised
• Mission should upload on first attempt
• Vehicle should automatically take-off upon engaging Auto
• Vehicle should adjust height to return altitude before returning home
• Upon landing, copter should not bounce on the ground