AUAV-X2 自动驾驶仪 (停产)

Discontinued

WARNING

This flight controller has been discontinued and is no longer commercially available.

WARNING

PX4 does not manufacture this (or any) autopilot. Contact the manufacturer for hardware support or compliance issues.

The AUAV^® AUAV-X2 autopilot is based on the Pixhawk^®-project FMUv2 open hardware design. It runs PX4 on the NuttX OS.

总览

• Main System-on-Chip: STM32F427
  • CPU：STM32F427VIT6 ARM 微控制器-版本 3
  • IO：STM32F100C8T6 ARM 微控制器
• 传感器：
  • Invensense MPU9250 9DOF
  • Invensense ICM-20608 6DOF
  • MEAS MS5611 气压计
• 尺寸/重量
  • 尺寸：36mm x 50mm
  • 安装点：30.5mm x 30.5mm 直径 3.2mm
  • 重量: 10.9g
• 具有反向电压保护的电源 OR-ing 原理图。 需要 5V 电源模块！

连接

• 2.54 毫米头：
• GPS (USART4)
• I2C
• 遥控输入
• PPM 输入
• Spektrum 输入
• RSSI 输入
• sBus 输入
• sBus 输出
• 电源输入
• 蜂鸣器输出
• LED 输出
• 8路伺服输出
• 6路辅助输出
• USART7（控制台）
• USART8（OSD）

访问链接

No longer in production. This has been superseded by the mRo X2.1. mRobotics is the distributor for the AUAV Products from August 2017.

主链接

• User Manual
• DIY Drones Post

接线指南

原理图

The board is based on the Pixhawk project FMUv2 open hardware design.

• FMUv2 + IOv2 schematic -- Schematic and layout

INFO

As a CC-BY-SA 3.0 licensed Open Hardware design, all schematics and design files are available.

串口映射

UART	设备	Port
UART1	/dev/ttyS0	IO debug
USART2	/dev/ttyS1	TELEM1 (flow control)
USART3	/dev/ttyS2	TELEM2 (flow control)
UART4
UART7	CONSOLE
UART8	SERIAL4