CUAV NEO 3 GPS
PX4 v1.13This NEO 3 GPS is manufactured by CUAV. It integrates Ublox M9N, IST8310, three-color LED lights and safety switches, and is compatible with CUAV and Pixhawk standard controllers.
Technical Specification
| 硬件 | 类型 |
|---|---|
| 罗盘 | IST8310 |
| GNSS receiver | UBLOX NEO M9N |
| RGB drive | NC5623C |
| 蜂鸣器 | Passive buzzer |
| Safety switch | Physical button |
| GNSS | Beidou, Galileo, GLONASS, GPS |
| GNSS Augmentation System | SBAS:WAAS,EGNOS,MSAS QZSS:L1s(SAIF) other：RTCM3.3 |
| Number of concurrent GNSS | 4 |
| Frequency band | GPS:L1C/A GLONASS:L10F Beidou:B1I Galileo:E1B/C |
| Horizontal accuracy | 2.0M |
| Speed accuracy | 0.05M/S |
| Nav. update rate | 25Hz(Max) |
| Acquisition | Cold start：24S Hot start：2S Aided start:2s |
| Number of satellites(MAX) | 32+ |
| Sensitivity | Tracking and nav-167dBm Cold start Hot star-148dBm Reacquisition -160dBm |
| Protocol | UART+IO+I2C |
| Port TYpe | GHR-10V-S |
| Supported flight controller | CUAV series, Pixahwk series |
| Wave filtering | SAW+LNA+SAW |
| Anti-Electromagnetic/radio frequency interference | EMI+RFI |
| Upgrade firmware | support |
| Input voltage | 5V |
| Operating temperature | -10~70℃ |
| Size | 60*60*16MM |
| 重量 | 33g |
尺寸
针脚定义
购买渠道
接线和连接
Neo3 wiring and connection diagram
