ARK PAB Power Module
The ARK PAB Power Module is an advanced power module rated for 60A continuous battery current at 20°C ambient. For higher continuous current needs, running multiple power modules in parallel is recommended. Note that at 60A and 20°C without cooling, the 5V regulator is de-rated to a 3A continuous output.
购买渠道
Order this module from:
- ARK Electronics (US)
Hardware Specifications
TI INA226 Digital Power Monitor
- 0.0005 Ohm Shunt
- I2C Interface
5.2V 6A Step-Down Regulator
- 33V Maximum Input Voltage
- 5.8V Minimum Input Voltage at 6A Out
- Output Over-Voltage Protection
- Output Over-Current Protection
Connections
- XT60 Battery Input
- XT60 Battery Output
- 6 Pin Molex CLIK-Mate Output
Other
- USA Built
- FCC Compliant
- Includes 6 Pin Molex CLIK-Mate Cable
Additional Information
- Weight: 17.9 g
- Dimensions: 4.75 cm x 3.43 cm x 1.15 cm
PX4 Setup
- Enable the SENS_EN_INA226 parameter if it not enabled.
- Reboot the flight controller.
See Also
- ARK PAB Power Module Documentation (ARK Docs)