Skip to content

모듈 참조: 시뮬레이션 ​

INFO

This page is auto-generated from the source code using the build command: make module_documentation. Do not edit it directly; fix the module documentation in the PX4-Autopilot source instead.

simulator_sih ​

Source: modules/simulation/simulator_sih

설명 ​

This module provides a simulator for quadrotors and fixed-wings running fully inside the hardware autopilot.

This simulator subscribes to "actuator_outputs" which are the actuator pwm signals given by the control allocation module.

이 시뮬레이터는 루프에 상태 추정기를 통합하기 위하여 실제 노이즈로 손상된 센서 신호를 게시합니다.

구현 ​

시뮬레이터는 선형대수를 사용하여 운동 방정식을 구현합니다. 쿼터니언 표현은 태도에 사용됩니다. 적분에는 순방향 오일러가 사용됩니다. 대부분의 변수는 스택 오버플로를 피하기 위하여 .hpp 파일에서 전역으로 선언됩니다.

예 ​

Pose the vehicle on the ground for accel and mag calibration (SITL only), sides named as the calibration names them. With rotate it turns about the vertical with a tilt swing, as the mag calibration asks for:

simulator_sih orient left rotate

Each side in turn: 10 s still, then 10 s rotating, then level. This completes either calibration.

simulator_sih orient all

Level the vehicle and resume the flight dynamics:

simulator_sih orient off

Usage ​

simulator_sih <command> [arguments...]
 Commands:
   start
     [-t <val>]  Terrain elevation GeoTIFF (DEM), SITL only
                 values: <file>

   orient        Pose the vehicle on the ground for calibration
     down|up|front|back|left|right|all|off Side facing down, every side in turn,
                 or level
     [rotate]    Rotate about the vertical

   stop

   status        print status info