Holybro H-RTK M8P GNSS (Discontinued)

WARNING

This GNSS has been discontinued, and is no longer commercially available.

The Holybro H-RTK M8P GNSS is an RTK GNSS module series for the mass market. This family is similar to the H-RTK M9P series but uses the smaller, lighter, and less expensive M8P u-blox RTK GNSS module (which still provides far superior position resolution than previous generations_.

Holybro H-RTK M8P에는 세 가지 모델이 있으며, 각각 다른 요구 사항을 충족하기 위해 서로 다른 안테나 디자인을 사용합니다. Refer to the Specification and Model Comparison section for more details.

RTK를 사용하면 PX4는 일반 GPS에서 제공하는 것 보다 훨씬 더 정확한 센티미터 수준의 정확도로 위치를 파악할 수 있습니다.

구매처

• H-RTK M8P (GPS RTK Mounts)

설정

RTK setup and use on PX4 via QGroundControl is largely plug and play (see RTK GPS for more information).

배선

All H-RTK GNSS models come with a GH 10-pin connector/cable that is compatible with Pixhawk 4.

INFO

The cables/connectors may need to be modified in order to connect to other flight controller boards (see pin mapbelow).

핀 맵

사양 및 모델 비교

GPS 소품

GPS Accessories (Holybro Website)