ARK FPV Flight Controller
WARNING
PX4 does not manufacture this (or any) autopilot. Contact the manufacturer for hardware support or compliance issues.
The USA-built ARK FPV flight controller is based on the ARKV6X in a 30.5mm standard mounting pattern, supporting a 3-12s battery input with a regulated 12V 2A output for video transmitters and payloads.
INFO
This flight controller is manufacturer supported.
Where To Buy
Order from Ark Electronics (US)
문서
See the documentation Ark Electronics GitBook
센서
Microprocessor
- STM32H743IIK6 MCU
- 480 MHz
- 2 MB Flash
- 1 MB RAM
커넥터
- USB C
- VBUS In, USB
- PWM
- VBAT In, Analog Current Input, Telem RX, 4x PWM
- JST-GH 8 Pin
- PWM EXTRA
- 5x PWM
- JST-SH 6 Pin
- RC INPUT
- 5V Out, UART
- JST-GH 4 Pin
- POWER AUX
- 12V Out, VBAT In/Out
- JST-GH 3 Pin
- TELEM
- 5V Out, UART with flow control
- JST-GH 6 Pin
- GPS
- 5V Out, UART, I2C
- JST-GH 6 Pin
- CAN
- 5V Out, CAN
- JST-GH 4 Pin
- VTX
- 12V Out, UART TX/RX, UART RX
- JST-GH 6 Pin
- SPI (OSD or External IMU)
- 5V Out, SPI
- JST-SH 8 Pin
- DEBUG
- 3.3V Out, UART, SWD
- JST-SH 6 Pin
Power Requirements
- 5.5V - 54V
- 500 mA (300 mA main system, 200 mA heater)
추가 정보
- Weight: 7.5 g g with MicroSD card
- Dimensions: 3.6 x 3.6 x 0.8 cm
- USA Built - NDAA compliant
- Heater: 1W for warming sensors in extreme cold
- LED Indicators
- MicroSD Slot