Power Modules & Power Distribution Boards
Power Modules provide a regulated power supply for the flight controller (FC), along with information about battery voltage and current. 전압/전류 정보는 소비 전력을 확인하고 남은 배터리 용량을 추정합니다. This in turn allows the flight controller to provide failsafe warnings and other actions in the event of low power: Safety > Low Battery Failsafe.
Power Distribution Boards (PDB) are circuit boards that may be used to simplify splitting the output of the battery to various parts of the drone, and in particular motors. PDBs will sometimes include a power module for the FC, ESCs for motors, and a battery elimination circuit (BEC) for powering servos.
The PX4 battery/power module configuration (via the ADC interface) is covered in: Battery Estimation Tuning.
TIP
For easiest assembly use a power module or PDB recommended by your FC manufacturer, and sized for your power requirements.
The Pixhawk connector standard requires that the VCC line must provide at least 2.5A continuous current and default to 5.3V. In in practice flight controllers may have different recommendations or preferences, so if you don't (or can't) use a recommended module, check that the module matches your FC's requirements.
This section provides information about a number of power modules and power distribution boards (see FC manufacturer docs for more options):
- 아날로그 전압 및 전류 전력 모듈 :
- Digital (I2C) voltage and current power modules (for Pixhawk FMUv6X and FMUv5X derived controllers):
- DroneCAN power modules