Test MC_07 - VIO (Visual-Inertial Odometry)

Objective

To test that external vision (VIO) works as expected

Preflight

Disconnect all GPS / compasses and ensure vehicle is using VIO for navigation

Ensure that the drone can go into Altitude / Position flight mode while still on the ground

Ensure there are no other sources of positioning besides VIO:

• EKF2_OF_CTRL: 0
• EKF2_GPS_CTRL: 0
• EKF2_EV_CTRL: 15
• SYS_HAS_MAG: 0

Flight Tests

❏ Altitude flight mode

    ❏ Vertical position should hold current value with stick centered

    ❏ Pitch/Roll/Yaw response 1:1

    ❏ Throttle response set to climb/descent rate

❏ Position flight mode

    ❏ Horizontal position should hold current value with stick centered

    ❏ Vertical position should hold current value with stick centered

    ❏ Throttle response set to climb/descent rate

    ❏ Pitch/Roll/Yaw response set to pitch/roll/yaw rates

착륙

❏ Land in either Position or Altitude mode with the throttle below 40%

❏ Upon touching ground, copter should disarm automatically within 2 seconds (default: see COM_DISARM_LAND)

예상 결과

• 추력을 올릴 때 서서히 이륙한다
• Drone should hold altitude in Altitude Flight mode without wandering
• Drone should hold position within 1 meter in Position Flight mode without pilot moving sticks
• 위에 언급한 어떤 비행 모드에서도 떨림이 나타나서는 안됨
• 지면에 착륙시, 콥터가 지면에서 튀면 안됨